Ei Professional Smoke Alarms and Smoke Detectors

Battery Powered Carbon Monoxide Alarm with Memory and Digital Display

Applications

In those instances where the budget will not cover the cost of installing mains powered Carbon Monoxide alarms, the alternative is to install a good quality battery powered alarm.

The 206D alarm uses a proven electrochemical cell type sensor which checks CO concentration every 50 seconds. All units are individually calibrated and tested in CO gas in order to ensure accuracy and they’re covered by a lifetime – 5 year guarantee.

As well as being easy to install and maintain, the alarms have a vitally important memory feature which records if CO has been detected whilst the occupier was away. Activated by pressing the test button, 1 flash of the red LED every 2 seconds indicates 150ppm, 2 flashes per second 350ppm.

The 206D also has a built-in digital display wich shows the CO level sensed in parts-per-million (ppm).

An easy to use Test/Hush button allows the user to check that the horn and electronics are working to silence nuisance alarms. Additionally, if testing with CO gas is required pressing the test button activates the “Quick CO gas test” feature which reduces the waiting time for testing with CO to approximately 20 seconds. On a large scale testing programme this represents a considerable time and cost saving.

Main Features

Easy to install

Electrochemical Cell CO Sensor

Digital Display of actual CO concentration in ppm.

Calibrated and tested in CO

9V Alkaline battery

Test/Hush button

Comprehensive indicator lights

Low and High Level Alarm Indicator

Distinctive alarm sound

Automatic self checking circuit

Memory

Quick CO Gas Test

Battery locking device

Neat slimline design

Suitable for both ceiling and wall mounting

No maintenance

5 Year Guarantee – includes batteries

Back to Top